High-lifter Tie Rod_Rack End Upgrade Kit for Polaris Ranger 50 Uživatelský manuál stáhnout pdf

780 Professional Drive N Shreveport, LA 71105 Phone(318)524-2270

Polaris Ranger Replacement Tie Rod Kit for Rack and Pinion

Parts Diagram

1 2 3 4 5 6

780 Professional Drive N Shreveport, LA 71105 Phone(318)524-2270 Polaris Ranger Replacement Tie Rod Kit for Rack and Pinion Parts Diagram

Installation Instructions 1. Remove the front tire nearest the rod you are replacing. 2. Remove the inner fender. Make sure you have a rivet tool!

6. Using a wrench disconnect the rod from the rack and pinion. 7. Now that you have removed the rod from the rack and pinion remove, end that conn

10. If you have not done so already install the jam nut back onto the rod end. Then, place the hex bar onto the rod. 11. Locate the new heim joint

14. Take the ½ x 3” Hex Bolt and insert one of the Hi-Alignment spacers onto the bolt. Slide the bolt into the heim joint, then place another Hi-Alig

Aligning the front wheels 1. Make sure that the tires are straight to sight. 2. Take a tape measure and measure from a flat spot on the front and ba

Žádné komentáře

High-lifter Tie Rod_Rack End Upgrade Kit for Polaris Ranger 50 Uživatelský manuál