High-lifter GUARDS DIAMOND PLATE REAR CV BOOT YAM. 660 GRIZZ Uživatelský manuál stáhnout pdf

High Lifter Products, Inc. (318) 524-2270

780 Professional N. Dr. Fax (318) 524-2297

Shreveport, LA 71105

Yamaha 660 Grizzly

Rear CV Boot Covers

Components:

CV Boot Covers 2ea

Mounting Bracket 2ea

6mm Allen Head Bolt 4ea

5/16 Bolt 2ea

5/16 Allen Head Bolt 2ea

5/16 nut 4ea

10mm Washer 2ea

Installation:

1. To make installation easier, turn off the gas inlet valve, place the transmission in park, and with

assistance stand ATV on its rear.

Installation can be done with ATV on the ground.

NOTE:

Anytime an ATV stands on its rear there is a danger of it falling. It is recommend that when

the ATV is standing on its rear that it be secured to a stable object, using a rope or ratchet strap.

2. Remove the plastic factory CV covers.

3. Place the High Lifter CV cover in place. Using a 4mm allen wrench and the 6mm allen bolts attach the

cover to the ATV. Place one 10mm washer between the CV Boot Cover and frame. (See illustration A)

4. Take the mounting bracket and insert it behind the CV cover, over the frame tubing and align with the

holes on the cover.

5. Using a 3/16 allen wrench mount the bottom side of the bracket with the 5/16 allen bolt. The bracket

hole facing the rear use the regular 5/16 bolt. The counter sunk bolt will go into the hole that will be

facing the ground and the regular 5/16 bolt will mount facing outward to the rear. (See illustration

B,C,&D)

1 2

High Lifter Products, Inc. (318) 524-2270 780 Professional N. Dr. Fax (318) 524-2297 Shreveport, LA 71105 Ya

Illustrations (A) Placing CV cover on ATV-Put washer between cover and (B) Mounting Bracket & CV Cover frame. (Washer acts as a spacer b

Žádné komentáře

High-lifter GUARDS DIAMOND PLATE REAR CV BOOT YAM. 660 GRIZZ Uživatelský manuál