High-lifter Lift Kit for Polaris 550 - Signature Series Uživatelský manuál stáhnout pdf

High Lifter Products, Inc. 318-524-2270

780 N Professional Drive 318-524-2297

Shreveport, LA 71105

Polaris 850 / 550 Lift Kit

Lift Kit Installation Instructions

NOTES:

FITS:POL.550/850SPORTSMANXP,X2,TOURING2009‐2011



FITS:POL.550/850SPORTSMANXP,X2andTOURING2010(REARFACTORYUPPERA‐ARMMODIFICATION

REQUIRED)



FITS:POL.550/850SPORTSMANXP2011(REARFACTORYUPPERA‐ARMMODIFICATIONREQUIRED&WE

RECOMMENDTHATTHECUSTOMERADDEITHERAHLPFRONTAXLEBARREPLACEMENTKIT(ABK‐P‐1)OR

UPGRADETOPROSERIESFRONTCVAXLESORGORILLAAXLEFRONTCVAXLES.

Read Before Installation

This product is designed for use on ATVs and/or RUVs to increase ground clearance and fender clearance. It is

designed for utility type, slow-speed use on relatively flat terrain in deep mud or snow. Although we have many

thousands of satisfied lift kit customers and over 1,800 franchised dealers selling and installing lift kits, purchasers

should be aware that use of this product may increase the frequency of required maintenance, part wear, and will

raise the center of gravity on your ATV and/or RUV, increasing risk of roll-over, injury and death on all types of

terrain. It is your responsibility to always inform other operators and passengers of this vehicle about the added

risks.

We recommend that wider tires and/or wheel spacers be used to achieve a wider stance and to improve stability of the

ATV and/or RUV. Riders should be advised that the handling characteristics of a taller ATV and/or RUV are

different and require extra care when riding, particularly on side hills or off-camber situations. If you further raise

the center of gravity by adding taller tires, heavy loads to racks or seats, or by any other means, the ATV and/or RUV

must be operated with even more care, at slower speeds and on relatively flat ground. All turns should be done at a

slow speed, even on level ground.

Operation of an ATV and/or RUV with or without a lift kit, while or shortly after consuming alcohol or drugs,

subjects the rider to the risk of serious bodily harm or possible death. This risk is compounded if the rider does not

wear an approved helmet and other safety gear. High Lifter urges that all approved safety gear be worn when riding

an ATV and/or RUV as a driver or passenger.

If this product is not what you expected, or is not consistent with your intended use, you should return the product

immediately to the seller,

before installation, for a refund of the purchase price; less any fees. After installation,

product is warranted for 90 days for defects in workmanship and materials. Warranty is limited to refund of the

purchase price or replacement of the kit, at the seller’s option.

Dealers and other Installers

You are responsible for informing your customer and end user of the information contained above and the increased

potential hazards of operating an ATV and/or RUV equipped with a lift kit. If you install the lift kit, it is your

responsibility to also install the warning label prominently in view of the driver and in prominent view of the driver

and passenger on RUVs and multi-passenger ATVs. They should also be instructed to notify anyone operating the

vehicle, as well as any passengers, that a lift kit is installed.

As discussed above, it is critically important that they be instructed in the need for slower speed operation, regardless

of terrain, after this lift kit is installed.

1 2 3 4 5 6 7 8

Shrnutí obsahu

Strany 1 - Polaris 850 / 550 Lift Kit

High Lifter Products, Inc. 318-524-2270 780 N Professional Drive 318-524-2297 Shreveport, LA

Strany 2 - Parts Diagram

Parts Diagram

Strany 3

Front Lift 1) Place ATV transmission in park. Place jack under center of ATV front end and lift until front wheels clear the ground. Be careful to

Strany 4

6) Next insert a 10x70 bolt thru the top of the lift bracket, and then place a 10mm washer on the bolt. 7) Push the 10x70 bolt thru placing anothe

Strany 5

Rear Lift 1) Place jack under the center of the ATV, just forward of where the rear drive shaft connects to the engine, and lift until the weight is

Strany 6

7) 2009 Models ONLY You will need to remove the rear stabilizer bar from the ATV. To do this you will need to remove the exhaust. 8) Start bu

Strany 7

10) Now, remove the 4 bolts that hold the stabilizer bar in place. 11) Remove the stabilizer bar. 12) Reattach the heat shield. 13) Once you

Strany 8

14) Insert the new bushings, sleeves, and caps into the new High Lifter lower control arms. Note: Placing some grease on the bushing and sleeves. Thi

Komentáře k této Příručce

Žádné komentáře

High-lifter Lift Kit for Polaris 550 - Signature Series Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Hardware High-lifter Lift Kit for Polaris 550 - Signature Series. High Lifter Lift Kit for Polaris 550 - Signature Series User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Hardware High-lifter Lift Kit for Polaris 550 - Signature Series